Which CO2 Laser Tube Is Best – DC or RF?

If you’re attempting to decide between DC or RF the difference between the two are massive. To help you decide on the purchase, we will help you understand what these differences are. One of the first decisions you should make when buying a CO2 laser is the choice between either a DC or direct current or RF which is a radio occurrence laser. Please keep reading if you’re interested in learning about the differences, and hopefully, this will help you decide which one to install when you are purchasing your laser cutter.

Head to Head Comparison

You will notice when putting up a comparison to which laser is the most effective, you will see that there are different pros and cons to each laser. The cost of a DC laser is roughly 10% of that price of an RF laser. The tripping performance on both lasers will be maintained at a very high-quality rate. However, RF lasers are posted, some materials may not cut as cleanly. This is a parent when you’re working with our acrylics. Another big noticeable performance with lasers are that are of lasers create a smaller place size for the output. This small output will leave you with a finer engraving. Or a high perfection engraving he will want to choose a DC laser. Lastly, the endurance is also different. You’ll find that the RF laser usually lasts 4 to 5 times longer than the DC lasers.

Hobby Laser Electricity Vs DC

If you were to take and compare 100 WRF to 100 DC laser, then you will typically assume that both are identical with their use of energy. The electrical power is different in an RF electrical laser then it is with an RF laser. The RF electric power focuses the same energy into a more compact laser A smaller circumference size. The quality and stability of these beams are also increased. For a better-detailed edging of an RF, you can gain this. However, with a lower and more affordable option, a lot more cutting power will be done with the DC laser. So, to identify what would be a better decision is a CO2 laser tube with a DC tubing.

Boss Laser Beam Advantages

The boss laser is one of the most excellent North American companies which offer both DC and RF lasers. Their knowledge is slowly increasing in photonics and can help your customers select the right machine to the correct tubing. Whether you represent a large corporation or you are representing your self, you will find that the right CO2 laser cutter is closer than you think. More details.

Conclusion

In conclusion, you’ll find that a DC tubing laser is going to be better in the long run if you are expecting a more affordable laser machine. If you are looking for precision, then you should choose the RF laser as it has a smaller circumference size and is also better at getting more precise cuts. Hopefully, this article has helped you decide on which laser to bang you want to install. For more information, please research each type of laser thoroughly.